|
NOKIA instructions on how to input
ringtone:
The following Nokia
models are able to accept a manual ringtone input:
3210, 3310, 61xx, 6210, 6250, 71xx, 81xx, 8210, 88xx, 9000, 9110
To use Composer on your Nokia mobile
phone just follow these steps:
1. select Menu
2. scroll to Tones and choose select
3. scroll to Composer and choose select.
4. select an empty tone or an unwanted tune press and hold the
"C" button (next to Navi key) to clear it. Press select.
5. Find the ring tone you like and then key it in. If you make
an error simply press clear screen to start again.
6. Set the tempo by selecting options and scrolling to tempo
7. set the tempo assigned from the phone ringer tunes display
page
Now your Nokia phone tune is complete
you can elect to play, name and save, or choose clear screen and
enter another ringer tune.
Nokia Ringtone Composer Notes:
( ) = hold appropriate key until
a dot appears in the note.
Commas are used to separate the
notes and are not to be entered into your mobile phone.
Key pressing the ring tone too quickly
may not enter the correct notes or miss out any digits. If a mistake
is made the tune will not sound correct.
When in composer the following keys
represent the following codes:
1 = C
2 = D
3 = E
4 = F
5 = G
6 = A
7 = B
8 = Shortens the note duration
9 = lengthens the duration
0 = insert a duration
* = sets the octave
# = denotes a sharp note
pressing and holding a note key shortens the duration by a half
and is represented by a dot.
Once you have saved your tone you
need to select it as the tone you would like to play on your phone.
To do this you need to:
1. go into Tones and push select
2. scroll to ringing tone and push select
3. scroll to the tone you would like to put into your phone (the
one you have named and saved)
4. push select
Your phone should now show you that
this is done and your new tone should now play.
|